HI, we have project requirement to integrate the Iridium Satellite phone integration with Cisco PABX to make a calls in case of emergency. Can you please suggest, what can we achieved with this interface.1) can we make calls on any number at cisco PA...
Hi all,I am setting up many Starlink antennas, and realizing that they have a fix IP address that is very often the same one of the gateway setup in the company.I see many companies setting up dedicated network for the Starlink antenna and then migra...
I don't deploy multicast often so I wanted to ask about MC configs as a sanity check. I have two Palo FWs each with a layer3 interface/gateway for separate servers. The FWs are two L3 hops away from each other. There are two L3 Catalyst 9300 switc...
Hi, One of the our client want to use Different make WAN router (not cisco) for WAN connectivity. At the same time, they wanted the backup call manager option for their cisco phones. Can we use SRST router somewhere middle of the network without any ...
Good morning I am facing the following problem on a customer location with main and backup router. cisco ISR4331/K9 We see constant incoming IHQ packets on the WAN Interfaces on both routers. At the same time there is almost no traffic on the WAN Int...
Hello, I am looking at deploying a cisco ISR router at another site, connected to a T1 line with a toll free number associated. Is it possible to use an existing PUB/SUB/IMP/UNITY environment to manage and route calls for this? Diagram below is what ...
Hello,We have upgraded all from 12.5 to 15 and Jabber fails (login) from outside. From inside all is fine. What would be a workaround to fix it.I assume its not a bug but just things are a bit different in 15. I also tried xConfiguration EdgeConfigSe...
Hi Guys n Gals,I am having a bit of trouble with an assignment I am doing in packet tracer.I don't have the files handy until the eve, so will send pics/files later if required.My problem is that I have an access router connected to 3 separate cluste...
Hi, I need assistance on CISCO manages switch power wiring and contacted technical support however they are asking me to contact sales team. SO I am looking for the contact detail (E-mail ID). Below is my Question.Question:We are HVAC control contrac...
I need retransmission to occur but FTD is not forwarding them.Is this related to the tcp map? tcp-map UM_STATIC_TCP_MAPno check-retransmission <------------no checksum-verification
we want to upgrade ucs to new version 4.x.x Does I need upgrade windows server driver ,I found Cisco provide iso driver according to new Ucs version. we have windows server 2012 But I search Cisco ucs compatible matrix web site I found according to ...
Recently, my system bought around 800 of the Lenovo Gen 4 Chromebooks. We already had around 2500 Gen 3 100e's that worked perfectly fine, still do. We divided the new laptops out to the locations, and 2 of the 10 locations are having issues where th...
We are currently evaluating Webex Contact Center as we consider transitioning away from UCCX. In our existing setup, if there are more than three people waiting in the call queue, an email is automatically sent to the supervisors to alert them. I've ...
Hi All, I am currently tyring to updage ACS 5.7 with patch4 to ISE 3.X and the traget location for ISE 3.X is Azure Cloud. Have not seen any upgrade guides and things to consider to perform this upgrade.So if someone who has done this can shed some l...
Hi! We are going to migrate network devices from old to new ise deployment. would it be alright to register the devices to both ise then remove them to old ise once everything is good on the new one? or is it better if remove the old ise first to the...