Hello everyone,We would like to use our “old” C2960X devices, which we have in large numbers, to connect simple devices such as printers or PCs that do not require PoE. The goal is to use SGT for these devices. I have already read that it is not poss...
Hi , I have Cisco wap361, recently it is sending lot of unusual traffic to firewall, basically this access point is sending traffic from 0.0.0.0 to multicaste IP , what is the reason behind this . We haven't done any changes recently.
Hi Team, Could anyone please help to confirm if the FLSA1-1X-2.5-10G= (2.5G to 10Gbps upgrade License for ASR 1001-X) is AEOS or not? If yes, what is replacement product for the same? ALso let me know if this is a perpetual license.
Hello,I have a switch I am unable get a prompt on the console port.I can SSH to it, and have confirmed that the baud rate and stop bits are correct from the console switch. There are two other switches that I can console to.The differences are that t...
Hi All! I have one problem related to running GuestShell on Nexus 9000 I managed to successfully run guestshell and install iperf3. But when i start measuring channel bandwidth, it shows tiny values, the hundreds of kilobytes, while the real channel ...
HiI have created the VTI Interface for this but when I run packet tracer input the VTI I nterface is not in the list of available interfaces to use in packet tracer.??Any ideas anyone Thanks
Hello Cisco community, i've got a weird problem. I have a server "A" connected to Gig2/0/16 as an access port (VLAN28) to my Catalyst C9300 switch (Two stacked switches). I can ping the device from within the switch. The switch has an SVI configured ...
Could someone know why /meetingInvitees API cannot be used recently? I'm getting Failed to invoke /meetingInvitees: code-403, response-{"message":"Target method cannot access because of access is denied","errors":[{"description":"Target method canno...
IBM released 5.3.0.9 ipfilter does not completely fix the issue.Please refer to https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwj92795The problem is not specific to CSW Agent <-> CSW Cluster communications.It may affect any IP fragmented traffic to...
Hi,We want to reuse ISR4K routers originally deployed as WAN routers and transform them into IPT voice gateways (VGW). As WAN routers, most of them were purchased using the SKU ISR4xxx-SEC/K9. We understand that to transform them into IPT VGW we woul...
I have one device southbound locked and one active device. One service is managing those two devices.When I send PATCH request to "/restconf/data/?commit-queue=async" , commits are queued for locked devices, this is fine.However, commits are not queu...
Hi folks,We are using anyconnect for vpn users and we use ISE for posturing the devices .We are running on version 2.7 patch 9 so our requirment is we need to upgrade the client laptops manage engine desktop client in all laptops we have made a scrip...
Dear All,After a crash during the upgrade from CUCM 12.0 to 12.5(SU8), the Publisher needs rebuilding. The backup TAR file isn't detected in DRS for restoration, so a temporary export file was used. Currently, phones are registered to the Subscriber....
Hi all, I have a cbs350-8p-e-2g with version 3.4.0.17, every time to reload it will show below message but I didn't make any configuration changes. Is it a bug ?"You haven't saved your changes. Are you sure you want to continue ?"
we want to upgrade ucs to new version 4.x.x Does I need upgrade windows server driver ,I found Cisco provide iso driver according to new Ucs version. we have windows server 2012 But I search Cisco ucs compatible matrix web site I found according to ...
