Activity in Technology and Support
Mobility Express Upgrade Failure
Hello, I am in the process of updating a Mobility Express WLC from Cisco. I have deployed the TFTP server and the correct images and the pre-download worked on all access points except one. In the following picture you can see what output I get. I l...
Installing Secure Client (5.x) AND Any Connect (4.x) on 1 computer
I have a weird situation I need to connect to two sepaate VPN (not at the same time).One of these requires Cisco Secure Client 5.x the second works with Any Connect 4.x.I have Cisco Secure Client 5.x installed, if i try connecting to the VPN that use...
ssh into a switch - no matching key exchange method found
Hello all, I have inherited an infrastructure with several catalyst 9200 switches. A few of them are unreachable when using ssh from a terminal, such as a linux server or Powershell. The error message is this: Unable to negotiate with <IP ADDRESS> po...
ISE 3.2 Repeat Count Details
Hi,on ISE 2.4 in the live logs pages the report that one got clicking on the repeat counter was very useful because the endpoints were sorted by repeat counters. So it was very easy to find the endpoints with high repeated counters.With ISE 3.2 the r...
What address-family does PE use to store the routes sent by the CE?
Hi all!English is not my first language, so I am sorry in advance if my words confused you. I tried my best.As far as I know, CEs don't have vrf in general, so CEs would use ipv4&ipv6 address family of BGP to form BGP neighbor with PEs and advertise...
Is there a CLI to monitor traffic stats on a l2transport interface?
Hi, as per the topic title is there a command that will allow me to display the traffic stats of a l2transport interface or is this achievable only through SNMP?Thanks a lot
Trunking an ip addressed inside interface on Firepower 2130
My network endpoints use the IP addressed vlans on my core cisco layer three core switch as their gateway addresses. i.e.- vlan 11 endpoint address 192.168.11.3/24 with gateway 192.168.11.1/24 (vlan ip on core) and vlan 12 endpoint address 192.168.12...
redundancy in core layer
hi guys . i have a network with below topology. In the core layer, I want to have redundancy, which means that if the main core switch of my network has a problem, the backup switch will automatically enter the circuit. What method is there?
ASR1001-X Thruput only 750 meg Interfaces10G both sides -Circuit 10G
We have a Cisco ASR1001-X and it can only pass 750 megs of traffic thru it on a 10 Gig circuit. I looked at licensing levels and they seem correct. Anyone have any ideas of what I can look at? Both Lan and Wan interfaces are 10 gig and Wan is using S...
FTD and FMC backup creating a sf-storage folder
Hello, Does anyone know why the FMC/FTD would create an sf-storage folder on a Linux Server? When I configured the remote storage I tried to point it so that the backups are stored into a certain directory, however it created a separate folder within...
Cisco Research Opportunity: $20 gift card for your feedback
Cisco's Customer Experience (CX) Research is looking for customers and partners who have experience viewing an inventory of licenses or managing license renewals. If you qualify to participate in our 15 minute research activity, you will be rewarded ...
Treck TCP/IP stack multiple vulnerabilities. (Ripple20)
We have a nexus 9k switch and the following vulnerability was found please help us to remediate this. Treck TCP/IP stack multiple vulnerabilities. (Ripple20)
A question about MAC addresses for access points
Can anybody tell me what exactly is the difference between the radio MAC address vs the ethernet and Wi-Fi mac addresses? What is the purpose of the radio MAC address? Apparently, wireless access points don't just have an ethernet and Wi-Fi MAC, but ...
training for CX Cloud
Hello, is there any training on CX Cloud in the Cisco Community resources? Thank you!
How to combine White List Entry - Server AND Mailadress
Hi all, i wonder if (and if yes how) its possible to combine a WhiteList Entry Server AND Mailadress. For example - we want to be sure that some mail adresses from a specific Server are whitelisted. Other Mails from this Server should be blocked and ...
| User | Helpful Count |
|---|---|
| 108 | |
| 80 | |
| 79 | |
| 70 | |
| 59 |
