Activity in Technology and Support
FIPs mode FMC/FTD
Trying to follow DISA SRGs, and one of the requirements is to enable FIPS mode on our 2140 FTDs, managed by FMC. I am new to these so was doing some searching online and it sounds like CC compliance is what needs to be enabled.Am I correct in saying ...
Resolved! N20-C6508 UCS 5108 Blade Svr AC Chassis/0 PSU/8 fans/0 fabric e
I have Cisco UCS 5108 and trying to install Cisco UCS 6324 Fabric Interconnect for the configuration purposes. I can't boot it normally. it's give ma message of non-supported.
Passing APIC-Cookie on subsequent API calls using requests in Python
I'm trying to write a python script that will help me with a project that I'm working on and I'm confused about what to do after I've logged into the APIC (stored my APIC-Cookie that I get in the initial login prompt). On subsequent requests, using ...
Resolved! Routes behind a tunnel-te unlabelled
I have created a tunnel-te from xrv16 to csr3, the tunnel is up and getting Pop label to csr3 that's ok.From xrv16 I have learned the route to xrv17 over the tunnel, but checking the Label it's unlabbled as well.I believe the route from xrv16 to xrv1...
Outbound and Inbound traffic in BGP
I'm confused about something and I'd like your help in understanding. Where I work, we have a router that's connected to 2 ISPs via BGP. Weight is set to 100 to ISP-A and 50 to ISP-B so outbound traffic is going through ISP-A and AS-Path prepend is m...
Resolved! How do I find out my DHCP server?
Hi all, noob here pls don't be too harsh.I have a kind of a small business setup with about 20 workstations and a physical server with some (yet unidentified) virtual machines.Domain controller is not some local sever, it is cloud-based: MS Entra ID ...
Unable to provision 9120 via CLI unless controllor is on the network
Hello,I work for a company where i need to stage 9120 access points and provision them manually with a AP Name and Primary controller before i ship them out. After issuing the commands it seems the AP just ignores them and doesn't update the AP name ...
What happens if Duo goes down
We just had a situation that raised some major red flags with the Duo MFA. We currently have it setup so that users need to confirm the Duo MFA when connecting to our cisco AnyConnect VPN. But just in this past hour, Duo was down and it caused users ...
Jabber fails from oustide after upgrade CCUM-CUC and Expressway
Hello,We have upgraded all from 12.5 to 15 and Jabber fails (login) from outside. From inside all is fine. What would be a workaround to fix it.I assume its not a bug but just things are a bit different in 15. I also tried xConfiguration EdgeConfigSe...
Switch Maximum Operating Temperature C9300/C9500
I'm having a quandary with temperatures on switches. The data sheet for these devices state that the max operating temp is 45-55C. Yet, I get an output like this: OR227-XW1>sho env tempSwitch 1: SYSTEM TEMPERATURE is OKInlet Temperature Value: 46...
Cisco CDO vs FMC and installation locations.
Hello y'all,My company is about to implement 2 FPR-1140's to replace our current ASA's, and my superiors are planning on installing CDO directly on the Firepower appliances, as well as a separate VM for FMC.My understanding is CDO is generally implem...
NDP not working between 9136 APs on 2.4 and 5GHz, 17.9.4, 17.12.2
In both 17.9.4 and 17.12.2 NDP appears to be broken between only C9136I-B and only on 2.4 and 5ghz - 6ghz works fine. This happens whether I set ndp-mode auto, ndp-mode off-channel, or ndp-mode on-channel in the 2.4 and 5ghz RF profiles. The default ...
SD-WAN Validator 20.14 Template issue
Hi, I'm configuring the SD-WAN Control Components 20.14 for a lab. I successfully created and attached a device templates with feature templates for the manager and the controller. I created a vEdge Cloud template for the Validator (vBond). But when ...
CSCvx56223 - Cisco C9120 AP stops allowing new associations on SSIDs
Hello CISCO Community, I am experiencing a rather odd situation with our wireless environment. We have recently upgraded our wireless controllers, CISCO Catalyst 9800-40, to the 17.9.5. After this upgrade we started experiencing loss of associations ...
How Does NAT-T work with IPSec?
Introduction:This document describes details on how NAT-T works. Background: ESP encrypts all critical information, encapsulating the entire inner TCP/UDP datagram within an ESP header. ESP is an IP protocol in the same sense that TCP and UDP are...
| User | Helpful Count |
|---|---|
| 145 | |
| 137 | |
| 107 | |
| 100 | |
| 75 |
