Technology and Support

Cisco ACI backup file MD5 calculation is missing 0's ?

Hello all,Long story but I had a lab upgrade from 5.2 to 6.0.5(M) fail on older APIC-M2's, and Cisco TAC suggested a fabric rebuild. Since I have newer APIC-M4's, I decided to install 5.3.2b on my APIC-M4's, and rebuild my lab fabric using those. All...

Siemens KNX Issue

Dear Community, I face a strange issue with some Siemens KNX Devices in my automation network . When i am connected with ethernet cable in automation network i can regonize siemens knx devices in my network and confiqure them via ETS(Siemens KNX Appl...

replace RV345 with another newer product

Hello to all,We have a dual WAN VPN RV345 router that has worked well so far. However, the security license and upgrades have expired. We have the opportunity to purchase a newer product. What are the successors to this model, or what would you recom...

power Imax error detected

My C1000-48FP-4G-L having issued cannot power up POE/POE+ AP devices and the switch running on latest stable version c1000-universalk9-tar.152-7.E10.tar. May 17 08:05:35.735: %ILPOWER-7-DETECT: Interface Gi1/0/1: Power Device detected: IEEE PDMay 17 ...

CSCwj82736 Bug

Can someone from Cisco TAC or Engineering please explain how this issue is replicated?I am aware about TLS1.3 hybridized support and that sending large size client hello.But how was out of order achieved while replicating this issue? Because it's a s...

IKEv2 Issue, can\t bring tunnel between Cisco Router and Palo Alto

Hi, I'm getting strange issues when I cannot bring up the tunnel between Cisco Router and Palo Alto FW,On Cisco router side I'm getting this on debug IKEv2:==================================================================*May 10 06:34:55.253: IPSEC:...

Cisco DNA Event driven task

 I would like to be able to have DNA run commands using command runner with an issues pops up.  As an example if DNA sees   " Netwrok Device Interface Connectivity - EIGRP Adjacency Failure " I would like it to run some show commands and email me the...

Not able to reset the GUI password of ISE from ISE cmd line

Hi, i am able to login to the cli cmd line of the ISE and not able to reset the admin GUI password of the ISE from the cmd line using the cmd "application reset-passwd ise admin" i am getting the error as below. "Error! Specified user does not exists...

How is CX Cloud different from other Cisco technologies like Cisco DNA

How is CX Cloud different from other Cisco technologies like Cisco DNA-Center, Intersight, and APIC?

Firepower Extended ACL does not work

Hello everyone, we are currently working on an issue related to ACLs. We have two branches (site-to-site VPN) and sometimes we need to enable communication between two computers (each computer is in a different branch). We don't want to allow all com...

SSM On-Prem RHEL8

Hi,I'm searching for an information regarding supported OS version but so far without any success. Currently, I'm handling a CSSM On-Prem that's on CentOS 7. Since the CentOS 7 is soon running out of support I'm looking for an information does the On...

filter default route

I have static default route configured in L3out-01 I have multiple OSPF L3outs with  0.0.0.0/0 and both “Export Route Control Subnet” and “Aggregate Export” are enabled  I need to filter default route when exporting route from one of the OSPF L3out. ...

B200 M3 blade & Windows 2012 Server

Does any has been able to install Windows server 2012 On a B200 M3 blade running 2204XP As fex with VIC 1240 card installed in blade. I am running 2.0(4b) On B 200 M 3 blades & while trying to install Windows 2012 . It installed succesfully since i a...

Please delete